Purify is a high-efficiency shampoo specially formulated to lift dirt and particles from the paint in one move. Minimizes the appearance of cross pores or damage to existing paint protection and leaves a high gloss surface behind.
Extremely good shampoo with a mixing ratio of 1: 1900 (ish), ie a cork is usually more than good. Purify does not contain SLS (Sodium Lauryl Sulfate) as a foaming agent. SLS is often produced by adding lye and besides being a strong solvent, is very irritating to the skin and dries out and can cause allergies, it is an environmental impact that nature has very difficult to break down. Purify instead contains other so-called foaming agents to get a thick and lovely lather that creates a membrane between the varnish and the wash glove, obviously works superbly in the foam gun!
I have chosen not to have any wax in this shampoo, Purify works instead of boosting the existing protection and leaves behind an incredibly fine shine, shines and cleans the varnish in depth. If you want even more shine and boost, it is Purify S that applies, but do not think you will be disappointed by the buzz in this one either. Now updated in V2, lower viscosity but still the same mixing ratio (easier to drain from the bottle) and just more of everything.
Very easy to use, mix a bucket with 20 liters of water, pour in a splash and activate the foam with the high pressure nozzle. Obviously goes well with regular crane as well.
DANGER: Irritating to skin. Causes serious eye damage. Harmful long-term effects too aquatic organisms. Keep out of reach of children. Wear protective gloves / protective clothing / eye / face protection. IF ON SKIN CONTACT: Wash with plenty water. IF IN EYES: Rinse gently with water for several minutes. Take from any contact lenses if it goes easy. Keep rinsing. Contact immediately POISON CONTROL CENTER / doctor. Remove contaminated clothing and wash before washing they are used again. The contents / container is left to a hazardous handling facility waste.